The tube and pipe cutting machines of the TT-NG-series are accurate in cutting and/or bevelling tubes and pipes of all schedules individually or in one simultaneous operation. These machines are especially designed to machine heavy wall tubes and pipes. They are very robust and can be installed in various positions. Their split frame configuration allows their opening in 2 half-shells. For the manual clamping 4 independent adjustable jaws are used. The machines have a rear centering feature and completely enclosed drive gears for the operators' safety.

The TT-NG pipe cutting machines can be equipped with ovality copying slides enabling to correct the defects of ovality of tubes and pipes. They can also be remotely controlled for operations in areas under ionizing radiations.

Several configurations of tool holders are available including wheel holders enabling for example for the replacement of steam generators to cut on a 90 mm wall thickness with severing tools and to cut the remaining 10 mm with wheels in order to reduce the production of chips and thus contamination.

Machining and clamping capacity:
60,3 mm OD – 2082,8 mm OD
2" – 82" OD
> 2082,8 mm on request

Clamping:
Manual with key

Bevel forms:
Facing, 30 and 37°30 bevel, J-bevel, compound bevel, others on request

Feed:   Automatic with clutch

Motorisation: pneumatic or hydraulic. Electric drives on request.

Each pipe cutting machine is delivered with:
2 tool holders
1 pointed cutting tool bit
1 severing cutting tool bit
Key, screws
Operating manual

No heat affected zone!